CPH6121 no.7260-1/4 pnp epitaxial planar silicon transistor applications ? relay drivers, lamp drivers, motor drivers, strobes. features ? adoption of mbit process. ? high current capacitance. ? low collector-to-emitter saturation voltage. ? high speed switching. ? ultrasmall-sized package permitting applied sets to be made small and slim (0.9mm). ? high allowable power dissipation. specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo --15 v collector-to-emitter voltage v ceo --12 v emitter-to-base voltage v ebo -- 5 v collector current i c -- 3 a collector current(pulse) i cp -- 5 a base current i b --600 ma collector dissipation p c mounted on a ceramic board (600mm 2 5 0.8mm) 1.3 w junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =--12v, i e =0 --0.1 m a emitter cutoff current i ebo v eb =--4v, i c =0 --0.1 m a dc current gain h fe v ce =--2v, i c =--500ma 200 560 gain-bandwidth product f t v ce =--2v, i c =--500ma 380 mhz output capacitance cob v cb =--10v, f=1mhz 40 pf collector-to-emitter saturation voltage v ce (sat) i c =--1.5a, i b =--30ma --110 --165 mv base-to-emitter saturation voltage v be (sat) i c =--1.5a, i b =--30ma --0.85 --1.2 v marking : av continued on next page. ordering number : enn7260 CPH6121 42503 ts im ta-100027 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. dc / dc converter applications package dimensions unit : mm 2146a [CPH6121] sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan 1 : collector 2 : collector 3 : base 4 : emitter 5 : collector 6 : collector sanyo : cph6 0.05 0.9 0.7 0.2 1.6 0.6 0.6 0.95 1 23 6 5 4 2.8 0.2 2.9 0.15 0.4
CPH6121 no.7260-2/4 continued from preceding page. ratings parameter symbol conditions min typ max unit collector-to-base breakdown voltage v (br)cbo i c =--10 m a, i e =0 --15 v collector-to-emitter breakdown voltage v (br)ceo i c =--1ma, r be = --12 v emitter-to-base breakdown voltage v (br)ebo i e =--10 m a, i c =0 --5 v turn-on time t on see specified test circuit. 30 ns storage time t stg see specified test circuit. 90 ns fall time t f see specified test circuit. 14 ns switching time test circuit collector current, i c -- a it04546 i c -- v ce collector current, i c -- ma collector-to-emitter voltage, v ce -- v it04543 0 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 --4.0 --4.5 --5.0 --200 --160 --140 --120 --100 --80 --60 --40 --20 --180 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 --2.0 --1.6 --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 --1.8 i c -- v ce collector current, i c -- a collector-to-emitter voltage, v ce -- v it04544 i c -- v be collector current, i c -- a base-to-emitter voltage, v be -- v it04545 0 --3.0 --2.5 --2.0 --1.5 --1.0 --0.5 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 h fe -- i c dc current gain, h fe v ce =--2v 25 c ta=75 c --25 c 100 0.01 2 3 5 7 2 3 5 7 1000 --0.01 23 57 --0.1 23 57 --1.0 --10 23 57 v ce =--2v ta=75 c --25 c 25 c --0.8ma --0.7ma --0.6ma --0.5ma --0.4ma --0.3ma --0.2ma --0.1ma i b =0 --2ma --4ma --6ma --8ma --10ma --12ma --16ma --14ma i b =0 v r 1k v cc = --5v v be =5v --20i b 1=20i b 2=i c =--1.5a + + 50 input output r l 220 f 470 f pw=20 s i b1 d.c. 1% i b2
CPH6121 no.7260-3/4 0 0 20 40 60 80 100 120 1.0 0.8 0.6 0.4 0.2 1.2 1.3 1.4 140 160 p c -- ta --0.1 --1.0 --10 --0.01 2 3 5 7 2 3 5 2 7 5 3 --0.01 --0.1 --1.0 23 57 23 57 23 5 --10 --100 it04553 it04552 v ce (sat) -- i c aso --0.1 23 57 --1.0 23 57 --10 2 2 3 5 7 2 v be (sat) -- i c it04551 --1.0 --0.1 --1.0 --10 --100 --0.01 --0.1 23 57 --1.0 23 57 --10 23 57 --0.01 --0.1 23 57 --1.0 23 57 23 57 3 5 2 7 2 3 5 7 5 3 2 v ce (sat) -- i c it04549 it04547 --0.01 10 --0.1 --1.0 23 57 23 57 23 5 1000 100 7 5 3 2 7 5 3 2 f t -- i c v ce = --2v i c / i b =20 2 3 5 7 2 3 5 i c / i b =50 i c / i b =50 25 c ta=75 c --25 c 25 c ta=75 c --25 c 25 c ta=75 c --25 c 7 it04550 i c = --3a i cp = --5a <100 s 1ms 10ms 100ms dc operation 500 s ambient temperature, ta -- c collector dissipation, p c -- w collector-to-emitter voltage, v ce -- v collector current, i c -- a collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- v collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- a mounted on a ceramic board(600mm 2 5 0.8mm) ta=25 c single pulse mounted on a ceramic board(600mm 2 5 0.8mm) collector current, i c -- a gain-bandwidth product, f t -- mhz 10 7 5 3 2 100 --1.0 --10 23 57 23 it04548 cob -- v cb f=1mhz collector-to-base voltage, v cb -- v output capacitance, cob -- pf
CPH6121 no.7260-4/4 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of april, 2003. specifications and information herein are subject to change without notice. ps
|
